Very few tile adhesives are as strong as Mapei Type 1 tile adhesive. That’s why many households use this product for their shower floor and bath wall.
However, often people complain about Mapei type 1 tile adhesive not drying.
A tile adhesive may not dry if you fail to adhere it properly, don’t follow the manufacturer’s instructions, or apply it on the wet floor. Plus, weather can also prevent the tile adhesive from drying.
In this write-up, we will discuss why Mapei Type 1 tile adhesive is not drying and how to fix it.
Causes of Mapei Type 1 Tile Adhesive Not Drying
Different reasons can prevent the Mapei Type 1 tile adhesive from drying properly. It may even don’t dry after one week. Here are the common causes:
- Using On the Wrong Tiles
Though Mapei Type 1 tile adhesive is a high-quality and strong sticky substance, it may not be for a particular floor tile.
Before choosing a specific adhesive, it is a good rule of thumb to figure out the best product for your bathroom floor and walls.
Bathroom tiles come in various types, and there is amyriad of different substrates for them. You have to consider it before purchasing your preferred adhesive.
- Dirt, Grit, or Grime on the Floor
Have you removed all the dirt, grit, or grime from your bathroom floor? If there is any substance where you want to tile, the adhesive won’t dry at its ideal time.
Instead, it will take more time and it will prevent binding on the surface correctly.
- Working On the Wet Floor
Before installing tiles using adhesives on the floor, make sure it is completely dry. You have to give enough time to evaporate moisture.
Installing on the dry floor surface will ensure strong bonding for the tiles to the surface.
A wet floor surface will prevent the adhesive from drying fast.
Apart from that, your bathroom tilling project is more likely to see failure or take double or triple to finish.
- Rainy or Too Cold Weather
Since Mapei Type 1 tile adhesive is modern, they need perfect weather for quick dry. Generally, this type of sticky substance works through reaction.
If the weather is rainy or too cold, its reaction time will be slower. Thus, the curing time of the tile adhesive will increase due to the surrounding environment.
It is better to plan to start your bathroom floor tiling project on summer or sunny days.
- Uneven Floor
Have you checked whether your bathroom floor is fully flat or even?
There should not be any buckles, sags, slopes, or bounces on the floor surface. Uneven flooring mainly occurs due to a high amount of water or moisture damage.
An uneven floor will prevent the tile adhesive from naturally drying because you have to use it extra than the ideal amount. Using more than required will lead to additional time to dry.
Also Read: MAPEI Ultracolor Plus Problems.
What to Do When Mapei Type 1 Tile Adhesive Not Drying?
Sometimes, it may take several days or weeks to dry the adhesive of your bathroom floor tile. This can happen for various reasons.
You might be following the wrong approach to dry out the adhesive or not following the perfect way of tiling your bathroom floor.
Here are some practical solutions you can utilize when your Mapei Type 1 Tile Adhesive is not drying naturally.
- Avoid Applying Excessive Adhesive
It is common to take more time to dry the adhesive if you have applied more than needed. Sometimes, you may think more amount will make the bonding stronger.
But it does the opposite. Apart from taking extra time, the bonding power of adhesive will reduce because external conditions are affecting it heavily.
- Stick with the ManufacturerGuidelines
Unlike other brands, Mapei also provides clear instructions on applying the adhesive and how much to apply.
Additionally, some Mapei adhesive products require premixing while others work without mixing.
You have first to determine which type of adhesive you want to purchase based on your bathroom floor and wall and use it accordingly.
- Maintain the Consistency
It is a good rule of thumb to maintain consistency while applying tile adhesive in all floor surface areas. Otherwise, you will see some areas start to dry while others do not.
According to most experts, the consistency of a tile adhesive should be like smooth peanut butter. Too thick adhesive will lead to manipulation inside the tiles.
In comparison, a too-thin bond won’t ensure strong adhesion.
- Use A Blow Heater
What to do when you have no option but to install the bathroom floor on rainy or cold days?
Generally, a minimum of 70-degrees temperature is required to allow the adhesive to dry naturally.
You can set up a blow heater near the bathroom area before applying the adhesive on the bathroom floor or wall.
This will boost the ambient air temperature. So, the essential ingredient in the adhesive will take less time to dry in cold conditions.
However, make sure you don’t overdo the temperature because excessive heat will force the adhesive to dry too fast. This will prevent a dedication adhesion between the floor and tiles.
- Use a Dehumidifier
Is your bathroom has a higher level of humidity? If yes, you may be struggling to dry your tile adhesive faster. In such a case, a high-quality Dehumidifier appears the best option. It can reduce the humidity level significantly.
This approach will help the air absorb more moisture from the surrounding area and allow the tile adhesive to dry quickly.
However, if your bathroom has a lower humidity level, you can try setting up an air conditioner or fan to decrease the humidity significantly.
- Clean The Floor Surface
Before adding the tile adhesive to the floor surface, ensure you have cleaned the area properly. There should not be any dirt, dust, or other substances on the surface. Otherwise, it won’t work correctly.
- Be Patient
Sometimes, you may be too excited and not give enough time to let the adhesive dry naturally. Make sure you go through the instruction manual to know how much time the Mapei Type 1 tile adhesive will take to dry properly.
Also Read: Why Is Mapei Premium Mortar Not Drying?
Frequently Asked Questions (FAQ)
How long does it take for Mapei Type 1 tile adhesive to dry?
Generally, it takes 24 hours to 48 hours to dry this adhesive properly. But it may take more or less time based on the external environment and other factors.
Can you use too much Mapei Type 1 tile adhesive?
You should not use too much tile adhesive since it may increase the curing time as well as lead to a weak point at the tile adhesion.
Where to apply theMapei Type 1 tile adhesive?
Many beginners mistakenly apply adhesive on the tiles instead of the bathroom floor and tiles. It is always best to use the Mapei Type 1 tile adhesive on the floor surface first and then place the tiles carefully.
Conclusion
Are you still wondering about Mapei type 1 tile adhesive not drying?
This can occur for a wide range of causes, which we have already covered. You must stick to the manufacturer’s guidelines to apply your tile adhesive.
Besides, we have also outlined what to do if your floor adhesive is not drying properly. Don’t forget to follow the tips we mentioned to faster your drying and curing procedure.
